Multi-Channel DC Electronic Load FT66100A Series

---

■ Module voltage range: 80 V, 500 V;

■ Module current range: 10 A, 20 A, 60 A, 120 A;

■ Up to six channels in one mainframe, for testing multiple output SMPS;

■ Parallel load modules up to 1800W for high current and power applications;

■ Synchronization (SYNC) with multiple loads, or control individually;

■ CC, CV, CR, CP and LED test modes;

■ 16-bit precision voltage and current measurement with dual-range;

■ 5-digit data display, 20kHz dynamicfrequency;

■ Fast response of 0.32mA/μs ~ 5A/μs current slew rate;

■ User programmable 10 programs, each contains 10 sequence steps;

■ High/Low limits (SPEC) of testing parameters to test GO/NG;

■ Program automatic test (PROG) and prompts results  in the form ofPASS/FAILURE;

■ Over current protection (OCP) testing function, prompts the test result in the form of PASS/FAILURE; ■ Digital I/O control ports, GO/NG output ports;

■ Remote sensingcapability;

■ Short circuit test, Voltage-on (Von)function;

■ Simulate capacitive & inductive load in CV Rise, CC  Rise mode(APPLY);

■ 8-inch self-adaptive LCD display;

■ Self-test at power-on;

■ OVP, OCP, OPP, OTP, polarity reverse connection  protection;

■ RS232, GPIB (optional), LAN (optional) ports,  support standardSCPI.